Noticias de la industria | 2025.06.20

What size cable is needed for a 7kW AC 2/3 wheel electric vehicle charging station?

What size cable is needed for a 7kW AC 2/3 wheel electric vehicle charging station?

Charging stations are a very common energy supply device nowadays, but there are still many people who do not know how many square meters of wires are needed to install charging stations. After all, the wire harness thickness of the charging post cannot be unified. It is mainly determined by the power storage capacity of the charging post and the voltage borne by the wire harness when the power is circulated. What size cable is needed for a 7kw charging station? What is the actual power?

2/3 wheel electric vehicle charging station

Charging stations can be divided into single-phase and three-phase, but whether it is single-phase or two-phase, the first step is to calculate the AC incoming line current.
For single-phase charging stations (AC charging stations), l=P/U
For three-phase charging stations (DC charging stations), l=P/(U * 1.732)

After calculating the current according to this algorithm, select the cable based on the magnitude of the current.

Manual/regulations related to charging station cables:
A single-phase charging station is generally 7KW (AC station) with l=P/U=7000/220=32A, and a copper core cable of 4 square millimeters should be used.
Three phase charging station (DC station)
15KW current 23A cable, 4 square millimeters
30KW current 46A cable, 10 square millimeters
60KW current 92A cable 25 square millimeters
90KW current, 120A cable, 35 square millimeters
Charging stations should have neutral and ground wires; So single-phase cables require three core cables, while three-phase cables require five core cables.

Palabras clave calientes: Fast charging AC Column Charging Post

How to distinguish between DC charging stations and AC charging stations?~~Primera~~ What are the advantages of the 2/3 wheel electric vehicle charging station source factory.~~Siguiente~~

: Post de carga de columna de CA de 7-20KW con carga de pistola doble
~~Más información~~

: 12KW AC carga pila-no pantalla
~~Más información~~

: Cargador de coche 120 / 160KW EV
~~Más información~~

What is the difference between a charging cabinet and a battery swapping cabinet?

The charging cabinet is used by users to charge their own batteries. They need to unplug their own batteries, put them in the cabinet,
2025-03-21 ~~Más información~~

In which scenarios is the battery swapping cabinet suitable for use?

In order to solve the pain points of electric vehicle charging and endurance, efficient and convenient shared battery swapping cabinets have emerged.
2025-03-21 ~~Más información~~

How is the standardization progress of current battery swapping cabinets.

At present, the standardization progress of battery swapping cabinets is steadily advancing, and a series of specific standardization plans or standards will be introduced in the future to promote the standardized development of the industry.
2025-03-20 ~~Más información~~

What are the benefits of installing electric bicycle charging cabinets and charging stations.

The number of electric bicycles is increasing, and how to safely and conveniently charge them is a problem for many people.
2025-03-20 ~~Más información~~

How to solve the charging problem of shared electric bicycles on the streets?

In recent years, shared electric bicycles, as an emerging green mode of transportation, have quickly emerged as a new favorite in the urban short distance travel market due to their convenience,
2025-03-19 ~~Más información~~

Analysis of the Development Trend of Battery Swap Cabinets in 2025.

As an important component of the new energy field, the future development trend of battery swapping cabinets can be analyzed from the following aspects:
2025-03-19 ~~Más información~~