Precautions for installation of outdoor electric scooter charging stations.

Precautions for installation of outdoor electric scooter charging stations.

Due to various reasons, there are now many electric vehicle charging stations installed outdoors. Due to the high demand for electric vehicle charging, many places have not yet had the opportunity to build carports and can only adopt this method of outdoor installation. This has caused a problem, as many people are worried that outdoor installation is unsafe. What should they do in case of rain or snow, and will the sockets leak electricity? Today, Xiaolian is looking for a charging station that can be installed outdoors to see if it really can be installed outdoors as claimed by the charging station manufacturer.

Firstly, we need to install rainproof sockets on the square steel in the open air. This is the effect of outdoor installation. If it rains or snows, rainwater will directly pour onto the sockets. If the sockets leak electricity, it will be very dangerous. Today, we will dismantle a socket and see what the structure inside is?

Firstly, after opening the socket, we can see that it is divided into two parts: the front shell and the rear shell. There are two screw holes in the middle for fixing the socket. It is very thoughtful that there are also two black rubber rings at the interface of the two screw holes, which can prevent rainwater from penetrating the interface. It must be said that this detail is handled very well, which shows the manufacturer's meticulousness.

Outdoor electric scooter charging stations generally have a rainproof cap design, which can effectively prevent rain and moisture. These two black rubber rings firmly seal the socket, and the interfaces around the socket are also treated very well. At the joint of the front and rear shells, a special slot is designed with a sealing rubber strip inside. After normal installation, the socket will be in a fully sealed state, further achieving waterproof treatment. According to the information provided by this manufacturer, the waterproof level of this socket is as high as IP54, and it has been certified by product quality testing.

The only place where water may enter the socket is located directly below the socket, which is the inlet of the socket. During normal installation, this inlet is facing downwards, and even if it rains, it will not cause rainwater to seep in, unless one day the gravity changes and rainwater can flow from bottom to top. It is worth noting that there is also a white plastic plug at this power interface to ensure the sealing of the wiring port and further achieve waterproof effect.

By now, everyone should have some understanding of the waterproof performance of this socket. In fact, if the manufacturers of electric vehicle charging stations strictly require the quality of their products, then the socket can definitely be installed under the sky. When choosing a charging station, everyone must consider this and ensure the safe use of the charging station!

What are the precautions for installing and operating outdoor electric scooter charging stations

Precautions for Operation of Large Outdoor Electric Vehicle Charging Stations
1. Reasonably lay equipment
Although the more equipment installed, the higher the revenue. However, when installing equipment, it is important to plan the demand ratio between electric vehicles and charging stations, and the site must also be well planned. If the location is too far away or the number of electric vehicles is insufficient, the charging stations will not be fully utilized, which will affect the later revenue.

When setting up a large electric vehicle charging station, it is necessary to start based on the actual installation location, whether it is the quantity or the specific installation location, it must meet the planning requirements.

2. Reasonable charges

The popular types of electric vehicle charging stations on the market now are 1-to-10 intelligent charging stations and 1-to-20 intelligent charging stations, which can meet the simultaneous charging of multiple electric vehicles. When setting electricity bills, operators must keep prices within a reasonable range. The operation of charging stations itself is an investment and a long-term profitable project. Do not attempt to raise prices to obtain high returns. If the fees are too high, it is easy to receive complaints from users. Installing charging stations is originally to facilitate users' charging, and reasonable fees are necessary for long-term operation.

3. Ensure proper operation and equipment maintenance

At the beginning of installing equipment, it is important to pay attention to finding installation technicians in order to avoid many dangerous factors during installation. The current intelligent charging stations all have relay adhesion circuit detection and fuse circuit detection functions. After the equipment is offline, fault information will be sent, and operators must promptly handle equipment failure issues.

We also need to do a good job in answering questions, event marketing, user instructions, etc., to make it more convenient and reassuring for users to charge.
Palabras clave calientes: electric car charging station companies battery swapping cabinet smart battery swap station